New DANTE DVS Update

Forums Forums iLive Forums Archived iLive Discussions New DANTE DVS Update

This topic contains 7 replies, has 6 voices, and was last updated by Profile photo of millst millst 10 years, 9 months ago.

Viewing 8 posts - 1 through 8 (of 8 total)
  • Author
    Posts
  • #23674
    Profile photo of millst
    millst
    Participant

    Perhaps all are not aware that there is a new release of DVS out and it supports WDM natively.
    This allows you to receive DANTE and route the signal to the windows audio mixer without any extra software or mucking around.

    You can route audio directly from DVS to your heaphone jack or other audio interface.
    I used it on a job at the weekend and it works well.

    #33488
    Profile photo of woutert
    woutert
    Participant

    I will definitely check it out!

    Wouter
    IDR32, R72, Dante, Mixpad
    laptop, TP-Link TL-WR1043ND

    #33489
    Profile photo of MJCElectronics
    MJCElectronics
    Participant

    Used the new driver in ASIO mode at the weekend with the 64 bit version of Reaper and it was fine so the need to run 32 bit Reaper is now gone [:D].

    #33491
    Profile photo of gilparente
    gilparente
    Participant

    Great. Ill try that today
    Thx for posting

    Gil Parente
    Design & Integration
    Entertainment Arts, Inc.
    iLive 176, T112
    iDR48 , iDR16, iDR10
    Multiple iPads
    Dante
    Etc..

    #34287
    Profile photo of Gerger
    Gerger
    Participant

    Has someone tried to use the notebook soundcard as input for talkback and output for PFL?

    #34290
    Profile photo of Biggsounds
    Biggsounds
    Participant

    quote:


    Originally posted by Gerger

    Has someone tried to use the notebook soundcard as input for talkback and output for PFL?


    Now that’s a cool idea!

    Adam Biggs
    T112 surface & iDR48
    T80 surface & iDR48
    MixPad for iPad & Tweak for iPhone apps
    Asus N61 Laptop (x2 wireless)
    Windows 7 Pro 64bit
    Mac Mini Server w/Mountain Lion

    with Belkin PlayMax N600 HD router
    Dante card tracking into Reaper with playback via FooBar (PC) or Presonus Capture/Studio One (Mac)

    Find me on Facebook – http://www.fb.com/BiggsoundsProductions

    #34304
    Profile photo of Gerger
    Gerger
    Participant

    I’ve tried it in my warehouse now. It works with Windows 7 without any additional software. Built in microphone has surprising good sound.

    My problem now is: Audinate webshop requires credit card for purchasing virtual soundcard software. 30$ offer is stil active and I cannot buy…

    But this is an other story…

    #34331
    Profile photo of millst
    millst
    Participant

    yes, I have used in ASIO mode for remote audio.
    I sent audio 2km over a wireless network to a laptop running DVS then send the audio out the headphone output of the laptop. Gave me low cost remote audio.

    Very Happy!!!!

Viewing 8 posts - 1 through 8 (of 8 total)

The forum ‘Archived iLive Discussions’ is closed to new topics and replies.