FX ideas and routing Questions ?

Forums › Forums › GLD Forums › Archived GLD Discussions › FX ideas and routing Questions ?

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • 2013/03/15 at 9:59 pm #23669
    Profile photo of Anonymous
    Inactive

    1 – will you integrate new FX in the future ?

    * Disto, Fuzz, overdrive
    * Multibande Compresseur
    * Deeser

    2 – is it possilble to assign groups to the L/R ?

    3 – there’s a SOLO IN PLACE, CLEAR SOLO ? I not find this options

    Regards

    Greg

    GL80 / AR2412 / AR84 / DANTE CARD / Protools 10

    2013/03/15 at 10:55 pm #33465
    Profile photo of VolumVolum
    Participant

    2 = Yes

    3 = Clear solo (PAFL) is on softkey 9, if you are running the newest firmware.

    Willy
    FOH-tech.
    GLD-80
    AR2412
    AR84

    2013/03/15 at 11:05 pm #33466
    Profile photo of Anonymous
    Inactive

    Yeh thanks Willy

    where is the function for assign groups to L/R ? , I can’t find it…. grrrrr [:(!]

    Clear solo it’s Ok ,

    No SOLO IN PLACE mode in this console ?

    GL80 / AR2412 / AR84 / DANTE CARD / Protools 10

    2013/03/15 at 11:36 pm #33467
    Profile photo of VolumVolum
    Participant

    Press “MIX” on the Main L/R channel, then press and hold down the “assign”-button (located between the two fader-banks) while pressing “MIX” on the group you want to send to L/R.
    You will then se “ON” in the group name/ch-window.

    As far as i know there is no SIP, but you can P(A)FL the signal by holding down the “Sel”-key for the preamp, the EQ, comp and so on, to monitor the signal in various places of the chain in your headphones.
    It’s possible that this signal can be routed to one of the outputs, but i have never tried it :) Anyone else?

    Willy
    FOH-tech.
    GLD-80
    AR2412
    AR84

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • The forum ‘Archived GLD Discussions’ is closed to new topics and replies.