Extreme Extender power

Forums › Forums › iLive Forums › Archived iLive Discussions › Extreme Extender power

This topic contains 1 reply, has 1 voice, and was last updated by Profile photo of Clay Clay 11 years ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • 2013/03/11 at 10:00 pm #23663
    Profile photo of Clay
    Clay
    Participant

    Does anyone know the pinout of HearBus? I would like to do a little hacking and use the Extreme Extender ADAT Out with the HearBus out port on the MMO by injecting power. Don’t worry, I’ll make sure to take the necessary precautions so that I don’t inject power back into the MMO [:)]

    Thanks,
    Clay

    2013/03/28 at 4:32 pm #33602
    Profile photo of Clay
    Clay
    Participant

    For anyone who’s curious, I contacted Hear Technologies and found out that pins 3 and 6 are ground and pins 4 and 7 are +18VDC. For testing purposes I stripped the jacket off of a CAT5e cable, cut the wires that should carry power and connected two 9v batteries in series to those wires on the ADAT Out side. Tested, and everything is working!

    [img]icon_paperclip.gif[/img] Download Photo/File: ADATextenderPower.JPG
    185.07 KB

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)

The forum ‘Archived iLive Discussions’ is closed to new topics and replies.