Topic: Monitor Split | Allen & Heath Digital Community

Monitor Split

This topic contains 6 replies, has 5 voices, and was last updated by questsoundpro 11 years, 1 month ago.

Viewing 7 posts - 1 through 7 (of 7 total)

Author

Posts
2013/02/26 at 4:54 pm #23628

questsoundpro
Participant

Has anyone use the FOH/Monitor split set up with 2 GLD 80s? Any issues?

2013/02/26 at 7:11 pm #33239

Chris93
Participant

Plenty of people have been recording from Dante and playing back from Dante. If this works then a Dante FOH/MON split will work.

Chris

2013/02/28 at 2:56 pm #33258

jonnyweston
Participant

Yep – I have 2 GLD80 both with Dante card, plus have access to another 2 with Dante card as well – this functionality works fine.

Not that difficult to set up either once you setup your Dante controller correctly.

If you stick a gigabit switch between the the desks then you also can record to a DVS enabled machine.
JW

A&H GLD80, AR2412 & Dante Card x 2
Korg M50, Novation SL25 MKII, Akai MPD26
Logic Studio 9, Reason 6.5, Ableton 8

2013/02/28 at 3:59 pm #33259

questsoundpro
Participant

Thanks the info. The video tutorial shows using an ACE card, is the Dante more reliable?

2013/02/28 at 9:53 pm #33263

cctrieloff
Participant

ACE is more the iLive setup, Go Dante, more options given you can route the protocol.

Carl.

2013/03/01 at 4:04 pm #33274

Nicola A&H
Keymaster

Hi questsoundpro,

Both ACE and Dante are reliable and suitable for your application.

Dante is preferable for interconnection with third party devices and audio networking, and as Jonny pointed out, it allows direct recording into a computer via Cat5.

ACE is a more cost-effective solution for simple FoH/Monitor split, and easier to setup as it doesn’t require a computer software.

I hope this helps,

Nicola
A&H

2013/03/03 at 1:30 pm #33294

questsoundpro
Participant

Nicola, thanks for the information. This helps me alot in my decision.
Author

Posts