Topic: New Firmware | Allen & Heath Digital Community

New Firmware

This topic contains 21 replies, has 14 voices, and was last updated by RYAN-LOUDMUSIC-JENKINS 10 years, 8 months ago.

Viewing 15 posts - 1 through 15 (of 22 total)

1 2 →

Author

Posts
2013/02/08 at 11:07 am #23591

antonyja
Participant

Allen and Heath are pleased to announce that the latest feature release of the GLD software (V1.10) is now available for download

For details of the changes please read the release notes.

Antony Jackson
Software Manager
Allen & Heath Limited

2013/02/08 at 11:11 am #33044

Chris93
Participant

That answers the question I just posted in the “store and recall” thread then

https://iliveforum.allen-heath.com/topic.asp?TOPIC_ID=2384

I’ll get a look at it tonight or tomorrow.

Chris

2013/02/08 at 12:42 pm #33045

Dancing-Frank
Participant

Awesome, that are some great and long wanted improvements!! Thanks to A&H!!
That makes the work in our fixed installation church environment much easier.

2013/02/08 at 4:21 pm #33051

BobWitte
Participant

The iPad app must be close….

Also note the EQ update….

https://www.prosoundweb.com/article/allen_heath_releases_version_1.1_v1.1_firmware_update_for_gld_mixing_system/

Bob

GLD80, AR2412, 2xAR84, Dante

2013/02/08 at 4:23 pm #33053

HalfBakedPotato
Participant

Nice updates! Cheers A&H!

2013/02/08 at 6:12 pm #33054

cctrieloff
Participant

Looks like a nice update. Will do it after our blizzard passes by here…

One thing I was hoping for was being able to run two sets of MIDI on select and un-select on the soft keys + MIDI commands for re patching IO from stage to Dante and visa versa.

please keep this on the feature request list..

thx, for the update.
Carl.

2013/02/09 at 2:16 pm #33058

bigbean
Participant

Excellent

OK class,

Are we all having smooth updates?

You there in the back row, Howsit going?
[?]

2013/02/09 at 2:36 pm #33059

spotkat
Participant

Updated yesterday and have had no issues as of yet. AR2412 with AR84 expander.

2013/02/09 at 2:37 pm #33060

bigbean
Participant

Thanks for the response.
………(Thinking about it, we’re all in the back row)

2013/02/09 at 4:34 pm #33061

Chris93
Participant

quote:

Originally posted by bigbean

You there in the back row, Howsit going?
[?]

Going well, I like the white GEQ. []

Chris

2013/02/10 at 3:19 pm #33064

byondo
Participant

quote:

Originally posted by Chris93

quote:

Originally posted by bigbean

You there in the back row, Howsit going?
[?]

Going well, I like the white GEQ. []

Chris

is there any practical guide, for using one over another GEQ type?
or some specific topic on Ilive forum.

Thanks
Massimo

2013/02/10 at 4:03 pm #33065

Chris93
Participant

I just stepped through them until I found the one that rang out the wedges with the least amount of cut, didn’t spend much time on it. It’ll be interesting to see why it is if you can find a guide like that. []

Chris

2013/02/10 at 6:54 pm #33067

glparke
Participant

New user to the gld and I have a question on this firmware update. Today I updated the firmware but I did not have 2 of my AR devices on during the update. My local ar84 was on but not those on the gld snake.side Do all the boxes receive a firmware update and do I need to do redo it so my AR boxes that were off get a firmware update.
Second service today at church and it went well except for a QOS error during the service on my gld snake side. Did not hear anything, but that has me concerned.

Thanks
Gary

2013/02/10 at 7:28 pm #33068

Chris93
Participant

Will it let you “update” the firmware again ( but with the AR connected)?

Chris

2013/02/10 at 7:44 pm #33069

Chris93
Participant

I forgot to check, does the talkback switch have a non latching mode?

Chris
Author

Posts