Patching channels via MMO to Hearback

Forums Forums GLD Forums Archived GLD Discussions Patching channels via MMO to Hearback

This topic contains 1 reply, has 1 voice, and was last updated by Profile photo of Sound Doctor Sound Doctor 11 years, 2 months ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #23529
    Profile photo of Sound Doctor
    Sound Doctor
    Participant

    I am a new GLD80 owner. Installed an MMO card into port
    B on the back of the mixer.
    I have signals from the MMO ADAT outs to my 24track recorder (Yes!) via MMO card, but am unable to get a signal to the Hearback IE hub. The channels are 57-65 according to the MMO documentation, but when assigning them to a direct out from a channel, no signal shows up on the Heaback distributor. I have a CAT 5 out of the MMO audio port (the left one closest to the ADAT’s) to the Hearback in on the HB hub. The switch on the front of HB hub is set to HB. What gives? Anyone know what I am missing?

    #32705
    Profile photo of Sound Doctor
    Sound Doctor
    Participant

    OK I searched the GLD forum and found an answer to my question.
    The MMO documentation is for the ilive system,not GLD.

    Here are the right channels to program:

    1-24 = ADAT 1-24
    25-32 = iDR/Hearbus A1-8
    33-40 = iDR/Hearbus B1-8

Viewing 2 posts - 1 through 2 (of 2 total)

The forum ‘Archived GLD Discussions’ is closed to new topics and replies.