Split Snake

Forums Forums GLD Forums Archived GLD Discussions Split Snake

This topic contains 5 replies, has 4 voices, and was last updated by Profile photo of ddff_lv ddff_lv 8 years, 7 months ago.

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • #23393
    Profile photo of Tanner_Gibbs
    Tanner_Gibbs
    Participant

    Regarding the GLD-80 is it possible to use the aviom out
    on the ar2412 as a split snake for other digital mixers.

    If not what would be some recommendation on a cheap easy
    split snake for the GLD-80?

    Tanner

    #31909
    Profile photo of gkhewitt
    gkhewitt
    Participant

    Use Dante.

    M-DANTE option card in the back of the GLD means that you can then send/receive 32ch over a Dante network which could consist of multiple devices such as another mixer (e.g. another GLD or anything else that supports Dante) or a DAW for multitrack recording.

    #31910
    Profile photo of Tanner_Gibbs
    Tanner_Gibbs
    Participant

    Awesome, thanks for your help

    Tanner

    #31912
    Profile photo of Tanner_Gibbs
    Tanner_Gibbs
    Participant

    would the Allen and Heath M-ACE-A work the same
    was as the Dante?

    It seems to be much cheaper and sounds like it does
    the same thing.

    Tanner

    #31914
    Profile photo of clarocque
    clarocque
    Participant

    M-DANTE is 64 channels i/o

    And will also allow recording with a laptop and software only, and 3rd party interfaces too.

    T112, iDR48 w/M-DANTE, PL10, MixPad, Editor
    GLD-80 w/M-DANTE, GLD-AR2412, GLD-AR84 (2)
    MacBook Pro, Mac Mini
    Lion/Logic Pro/PT10
    All latest versions/firmware

    #31916
    Profile photo of ddff_lv
    ddff_lv
    Participant

    Sure, you can also use ACE card, but it’ll give you only point to point connection to another A&H mixing console. Dante is more flexible option.

    ddff

Viewing 6 posts - 1 through 6 (of 6 total)

The forum ‘Archived GLD Discussions’ is closed to new topics and replies.