Old tech going digital

Forums Forums GLD Forums Archived GLD Discussions Old tech going digital

This topic contains 1 reply, has 2 voices, and was last updated by Profile photo of ddff_lv ddff_lv 8 years, 8 months ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #23281
    Profile photo of ridleyville
    ridleyville
    Participant

    I have been analog for the last 30 years and have finally moved up from the GL3300 to the GLD 80. Slowly but surely getting my head round it but having a little problem understanding how to group channels to a group so I can then use the graphic to notch out before sending to the main. I know the eq on each channel is available and very good but whe you have 8 or 10 table mics for a conference I find that splitting them into smaller groups and using the geq helps a lot.
    Hope I explained myself ok and hope someone can point me in the right direction.
    Cheers

    #31294
    Profile photo of ddff_lv
    ddff_lv
    Participant

    I believe you do as with analog desk- route channels to group. Unassign them from main buses (while in main mix hold asign button and press appropriate channel mix button) and asign them to group.

    ddff

Viewing 2 posts - 1 through 2 (of 2 total)

The forum ‘Archived GLD Discussions’ is closed to new topics and replies.