I don’t know if this is a problem with the app or it was designed this way, but I cannot see, let alone adjust, the preamp of any local input at the surface from Mixpad.
In fact, the PreAmp section of the app states “Unknown Surface Inputs”. It does not show phantom selection or the pad buttons either. It does show the Polarity and trim as well as the HPF selection and Name and Color.
We are using the iLive-144 which is modular, with slots A and B using Mic/Line In Cards and Slots C and D using Mic/Line Out cards. This is used with the iDr-10 rack.
Kris
Indiana, USA