Pairing channels?

Forums › Forums › GLD Forums › Archived GLD Discussions › Pairing channels?

This topic contains 1 reply, has 2 voices, and was last updated by Profile photo of soundman47 soundman47 11 years, 11 months ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • 2012/05/02 at 2:51 pm #23120
    Profile photo of TJCornish
    TJCornish
    Participant

    I see that inputs 45/46 and 47/48 are stereo and appear on one fader. I’m also familiar with channel ganging. Is there any way to make 2 regular channels into a stereo pair without ganging?

    2012/05/05 at 4:30 pm #30505
    Profile photo of soundman47
    soundman47
    Participant

    Not that I can see. You have 8 gangs in the system. Do you need more than 8 stereo channels? If not, you can gang two together and then hide the ganged channel on the bottom layer or not assign it to a fader at all. That way you have 1 fader that is effectively controlling 2 channels. I’m doing this now for some stereo keyboards and it works great.

    T112/IDR48
    T80/IDR32
    iPad 2
    Linksys/Cisco E3000 router
    Everything updated to current Firmware

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)

The forum ‘Archived GLD Discussions’ is closed to new topics and replies.