AirPort Express Users

Forums Forums iLive Forums Archived iLive Discussions AirPort Express Users

This topic contains 5 replies, has 3 voices, and was last updated by Profile photo of  Anonymous 12 years, 3 months ago.

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
  • #23087
    Profile photo of

    Any settings advice? I can connect using this router, and it runs OK but does not stay connected very well.

    Current settings:
    Router address
    Subnet mask
    Set for DHCP but not NAT
    DHCP license distribution
    WPA/WPA2 security
    Hidden network
    Radio mode 802.11n only

    Any tips would be appreciated.

    Profile photo of Stix

    What are you connecting with? I have an Airport Express and have no disconnect problems with laptops or iPad.. Perhaps there are other wireless networks around on the same channel?


    Richard Howey
    Audio Dynamite Ltd
    Dual M-Dante/DVS, 17″MBP/Logic 9/Custom Mackie Control

    Profile photo of

    I’ve been connecting from an iPad 2 to the AirPort Express hard-wired to an iDR-32. My MacBook Pro is also hardwired to the MixRack.

    It’s possible the Ethernet cable connecting the AEP to the MixRack is bad. Don’t have a tester nearby but will swap tonight and try again.

    Thank you.

    Profile photo of SteffenR

    It’s more valid what’s happening in the wireless (RF) part…

    R-72, iDR-16, xDR-16, Dante

    Profile photo of

    After checking connections, cables, reviewing past posts to find an answer, my AirPort Express still drops a connection, even at home with no obstructions, after about 4-5 minutes of use.

    Any suggestions as what to do would be greatly appreciated.

    Profile photo of


    Reset AirPort Express completely and started over. Not sure how I did it, but reconfiguring it from scratch seems to have solved my issues. Works fine now.

Viewing 6 posts - 1 through 6 (of 6 total)

The forum ‘Archived iLive Discussions’ is closed to new topics and replies.