Tunneling MIDI over Ethernet

Forums Forums iLive Forums Archived iLive Discussions Tunneling MIDI over Ethernet

This topic contains 4 replies, has 4 voices, and was last updated by Profile photo of Stealth Stealth 12 years ago.

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • #22986
    Profile photo of Dave
    Dave
    Participant

    Any thoughts about providing drivers to tunnel generic MIDI iver the Ethernet connection to the recording software to allow iLive use as a general recording interface with MIDI recording?

    iDr48/T-112/MADI

    #29875
    Profile photo of woutert
    woutert
    Participant

    What do you want to do exactly?

    Wouter
    IDR32, R72, Dante, Mixpad
    laptop, TP-Link TL-WR1043ND

    #29876
    Profile photo of Stix
    Stix
    Participant

    If you want to get midi from stage mixrack to surface then you can do that already ( midi is tunneled over the Ace network from midi in to midi out both directions) – if you want to record that midi signal to a laptop then all you would need is a midi interface at the laptop end.

    Cheers

    Richard Howey
    Audio Dynamite Ltd
    IDR48/IDR16/T112/R72/Mixpad,Tweak,
    Dual M-Dante/DVS, 17″MBP/Logic 9/Custom Mackie Control

    #29881
    Profile photo of Dave
    Dave
    Participant

    It was the possibility of using the iLive as the MIDI interface I was enquiring about.

    iDr48/T-112/MADI

    #29882
    Profile photo of Stealth
    Stealth
    Moderator

    Hi dburris

    The iLive systems continuously send and recieve MIDI data, so yes you can use the iLive as a MIDI interface. Here is a link to exactly what you can control.

    https://www.allen-heath.com/UK/CategoryDocuments/iLive%20MIDI%20Protocol%20V1.8.pdf

    I am afraid we do not currently have a Mac or windows driver for use to convert iLive MIDI into a DAW sequencer via TCP/IP, though this is already on our request list.

    Currently the easiest way is to use a USB MIDI interface with your computer (e.g. M-Audio MIDIsport) then connect the MIDI IN/OUT ports on either the mixrack or surface.

    Regards
    Sam A&H

Viewing 5 posts - 1 through 5 (of 5 total)

The forum ‘Archived iLive Discussions’ is closed to new topics and replies.