Control Surface TCP/IP Protocols

Forums › Forums › iLive Forums › Archived iLive Discussions › Control Surface TCP/IP Protocols

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • 2012/02/22 at 9:58 pm #22942
    Profile photo of RusselgRusselg
    Participant

    In many integrated systems it is preferable to execute system shutdown via some form of power sequencing system.

    It would be ideal to issue a TCP/IP command from a Crestron or similar system instructing the control surface to initiate its power down process.

    When coordinated with appropriately timed control of the AC power sequence, a single button, “automated” shutdown process would be possible.

    Is this command currently available or are there plans to implement in the future?

    Sincerely,
    Russel Goodwin
    Acoustical Design Group
    Kansas City

    2012/02/22 at 11:37 pm #29675
    Profile photo of Anonymous
    Inactive

    I wonder if this is an option through the PL-Net set up. Using a PL-8 would take care of it.
    I’ll look next time I’m in a system. But I don’t think it is an option..
    You do bring up a good point.

    Gil Parente
    Design & Integration
    Entertainment Arts, Inc.
    iLive 176, T112
    iDR48 , iDR16, iDR10
    Multiple iPads
    Dante
    Etc..

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • The forum ‘Archived iLive Discussions’ is closed to new topics and replies.