lamp T112

Forums › Forums › iLive Forums › Archived iLive Discussions › lamp T112

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • 2011/11/10 at 6:29 pm #23016
    Profile photo of Lieven-DewispelaereLieven-Dewispelaere
    Participant

    Does anybody now how much power i safely can draw from the lamp sockets on a T112 surface?
    I couldn’t find it in the manual or in the specs.I don’t use LED lamps but halogen lamps.
    I have spares that i want to use but they are 12V6W each. that gives 1A on the sockets.
    Right now i use 2 * 12v5W

    Regards

    Lieven

    T112/IDR48/R72/IDR16/xDR16/IPad1
    Save a tree, eat a beaver

    2011/11/11 at 9:37 am #28876
    Profile photo of StealthStealth
    Moderator

    Hi Lieven

    The T112 is specified to provide 1A of continuous current to the Lamp sockets.
    (That is 500mA per Socket).

    Drawing higher current will not cause any harm as this circuit has a resetable fuse which will simply shut the lamps down if say 2A were to be loaded on the circuit.
    The circuit infact will happily provide a slightly higher than specified current.

    Hope that hellps

    Regards
    Sam A&H

    2011/11/11 at 10:10 am #28877
    Profile photo of Lieven-DewispelaereLieven-Dewispelaere
    Participant

    Thanks Sam,
    Thats perfect

    Kind Regards

    Lieven

    T112/IDR48/R72/IDR16/xDR16/IPad1
    Save a tree, eat a beaver

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • The forum ‘Archived iLive Discussions’ is closed to new topics and replies.