Topic: Aux on post | Allen & Heath Digital Community

Aux on post

This topic contains 5 replies, has 5 voices, and was last updated by martijn 12 years, 5 months ago.

Viewing 6 posts - 1 through 6 (of 6 total)

Author

Posts
2011/10/20 at 2:53 pm #22981

moses
Participant

when ever i update my firm fare i really hate to go to every aux and make into post so is there one button which will allow me to makes all the auxes post /pre

2011/10/20 at 3:06 pm #29849

SteffenR
Participant

Save this as a scene

SRV-AVB
R-72, iDR-16, xDR-16, Dante

2011/10/20 at 3:19 pm #29850

moses
Participant

nop its not working i did that earlier

2011/10/20 at 3:38 pm #29851

CareyD
Participant

Before you update your firmware, archive your settings as a User Show (Utility page / Show Manager). After you update your firmware you can recall that User show or a Template show to get you back to a known starting point.

Yes, there is one button to make all 64 channel sends for an Aux pre or post. Press MIX for the Aux, then hold down the PRE/POST FADE switch and press the Aux master strip SEL key once or twice to toggle Pre or Post for all channels.

Hope that helps,
Carey

2011/10/26 at 7:05 am #29923

guyharris
Participant

Hi Carey,

Is that solution for the ‘global’ pre/post only when using a surface? I also find it quite irritating (and time-consuming) to change all the pre-posts for all my Auxes …

Cheers!

Guy

http://www.pianojam.nl

2011/10/26 at 10:11 am #29925

martijn
Participant

You can do a right click on the aux bus.
>Routing>All Pre!
Author

Posts

Viewing 6 posts - 1 through 6 (of 6 total)

The forum ‘Archived iLive Discussions’ is closed to new topics and replies.