PL-6 TAP tempo wrong

Forums Forums iLive Forums Archived iLive Discussions PL-6 TAP tempo wrong

This topic contains 9 replies, has 4 voices, and was last updated by Profile photo of Nettan Nettan 9 years, 7 months ago.

Viewing 10 posts - 1 through 10 (of 10 total)
  • Author
    Posts
  • #22920
    Profile photo of Nettan
    Nettan
    Participant

    Hi,

    I´v got PL-6 remote for iDR-32. Tap tempo is not what I´m tapping. In editor tempo is fine.

    Kalle

    Kalle Nettan
    IDR-32/PC/BCF2000

    #29555
    Profile photo of mumu
    mumu
    Participant

    did you auto assign led to button?

    cheers
    dave

    allen&heath iLive-144 /idr 10 / idr 48 /dante (i want midi in dante!)

    #29560
    Profile photo of Nettan
    Nettan
    Participant

    yes,I did. does it interrupt with tempo? I´l trie without it.

    Kalle Nettan
    IDR-32/PC/BCF2000/PL-6/iPad2

    #29561
    Profile photo of mumu
    mumu
    Participant

    nono it shoud be displaiyng correcetly, although i am not satified with any tapping – even with standalone t.c. delays

    cheers
    dave

    allen&heath iLive-144 /idr 10 / idr 48 /dante (i want midi in dante!)

    #29610
    Profile photo of Nettan
    Nettan
    Participant

    no change, display on-off, still tempo something 100 ms faster than I tap

    Kalle Nettan
    IDR-32/PC/BCF2000/PL-6/iPad2

    #29613
    Profile photo of Stix
    Stix
    Participant

    Just a guess but perhaps the PL6 measures the tap time interval from button release to button on so it might depend how long you hold the button down when tapping. Perhaps someone might be able to verify this as I don’t have a PL6 to test this theory?

    Cheers

    Richard Howey
    Audio Dynamite Ltd
    IDR48/IDR16/T112/R72/Mixpad,Tweak,
    Dual M-Dante/DVS, 17″MBP/Logic 9/Custom Mackie Control

    #29620
    Profile photo of Nettan
    Nettan
    Participant

    thank you for the hint, but unlikely so, will try this also tomorow

    Kalle Nettan
    IDR-32/PC/BCF2000/PL-6/iPad2

    #29625
    Profile photo of Stealth
    Stealth
    Moderator

    Hi All

    We are aware there is some latency with LED flashing when assigned to tap tempo on a PL device, this is not a problem with audio, only the latency of the flashing LED so you are still be able to tap a correct BPM for the delay using the PL buttons when assigned to tap tempo.

    To improve the PL tap tempo latency with reference to the tap tempo on the surface softkeys you could connect your PL device to the PL port on a modular surface if you have this option available.

    Regards
    Sam A&H

    #29626
    Profile photo of mumu
    mumu
    Participant

    aha that is why i did not notice it (144 here)

    cheers
    dave

    allen&heath iLive-144 /idr 10 / idr 48 /dante (i want midi in dante!)

    #29631
    Profile photo of Nettan
    Nettan
    Participant

    quote:


    Originally posted by Stealth

    Hi All

    We are aware there is some latency with LED flashing when assigned to tap tempo on a PL device, this is not a problem with audio, only the latency of the flashing LED so you are still be able to tap a correct BPM for the delay using the PL buttons when assigned to tap tempo.

    To improve the PL tap tempo latency with reference to the tap tempo on the surface softkeys you could connect your PL device to the PL port on a modular surface if you have this option available.

    Regards
    Sam A&H


    still tempo is much faster than I tap it

    Kalle Nettan
    IDR-32/PC/BCF2000/PL-6/iPad2

Viewing 10 posts - 1 through 10 (of 10 total)

The forum ‘Archived iLive Discussions’ is closed to new topics and replies.