Could this be a bug?

Forums Forums iLive Forums Archived iLive Discussions Could this be a bug?

This topic contains 4 replies, has 3 voices, and was last updated by Profile photo of abstractnoise abstractnoise 12 years, 9 months ago.

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • #22841
    Profile photo of PVH
    PVH
    Participant

    Version 1.82
    iLive T-112 + iDR64

    L and R Graphic EQ ganged
    Choose L, EQ/Fader flip, any fader (example 1 KHz) full down, EQ/Fader flip, choose R, EQ/Fader flip, reset 1khz by pressing SEL, 1 kHz is reset, EQ/Fader flip, choose L, EQ/Fader flip, 1 kHz is not reset.
    If I do the same with the fader instead of the SEL button, then the EQ link is working OK.
    Peter

    #28622
    Profile photo of PVH
    PVH
    Participant

    At least one colleague confirmed this behavior.
    Peter

    #28623
    Profile photo of Stealth
    Stealth
    Moderator

    Hi Peter

    Well Spotted!

    I have confirmed this bug here at A&H. We will have this fixed in a maintanence release of iLive firmware.

    Regards
    Sam A&H

    #28624
    Profile photo of PVH
    PVH
    Participant

    This happens not only on L R, but also on auxes.
    Peter

    #28628
    Profile photo of abstractnoise
    abstractnoise
    Participant

    Ooops! Just as well that from the old days of previous digital mixing systems I used, I continued the practise of “always adjust the left channel for ganged/stereo groupings”. Thanks Sam for letting us know it’ll be fixed though!

    Work web: https://www.allsouls.org
    Home web: https://abstractnoise.co.uk

Viewing 5 posts - 1 through 5 (of 5 total)

The forum ‘Archived iLive Discussions’ is closed to new topics and replies.