Topic: recording gaps dante on old vaio | Allen & Heath Digital Community

recording gaps dante on old vaio

This topic contains 4 replies, has 3 voices, and was last updated by mumu 12 years, 10 months ago.

Viewing 5 posts - 1 through 5 (of 5 total)

Author

Posts
2011/06/05 at 10:18 pm #22818

mumu
Participant

hmm tested today stereo recording (main out) on dante to an old vaio,
yes it has only a 100mb lan, but it should handle one 24 bit stereo file,
the recording is fine (no clicks and so on) but has gaps every 10 secs,
absolutely clean gaps,like someone would quickly mute/unmute.
hints welcome

cheers
dave

allen&heath iLive-144 /idr 10 / idr 48 /dante (i want midi in dante!)

2011/06/06 at 1:53 am #28504

Stix
Participant

Perhaps check your ASIO buffer settings? Check no other PC programs or processes are trying to gain network/Internet access? Disable your wireless card? That’s my suggestions.

Cheers

Richard Howey
Audio Dynamite Ltd
IDR48/IDR16/T112/R72/Mixpad, dual M Dante/DVC

2011/06/06 at 9:44 am #28511

mumu
Participant

did all of that (i have a recording studio on pc for 15 years)
hmm glad i did not pay yet….

cheers
dave

allen&heath iLive-144 /idr 10 / idr 48 /dante (i want midi in dante!)

2011/06/06 at 9:57 am #28513

AndyH
Moderator

Have you got any other devices on the network? If so, try removing any other network devices (switches, access points) and just connect one short RJ45 between the laptop and the Dante Port.

Also try opening up Dante Controller, just to make sure you always have green ticks on your assignments. I highly doubt this would be your problem, but just worth checking.

AndyH

2011/06/06 at 8:37 pm #28521

mumu
Participant

i know all that (thanks anyway) best result so far by giving a static address – i keep trying.
thanks again

cheers
dave

allen&heath iLive-144 /idr 10 / idr 48 /dante (i want midi in dante!)
Author

Posts