DANTE card operation

Forums › Forums › iLive Forums › Archived iLive Discussions › DANTE card operation

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • 2011/05/17 at 6:42 am #22782
    Profile photo of Anonymous
    Inactive

    Hi,
    I am one of the lucky guys who received a card yesterday.
    Installation and setup work as easy as getting the card out of the box.
    I just get one minor point where I am not sure where it comes from.

    My test-setup is:
    Channel 1-32 (iDR32) –> RX0-RX31 (Dante)
    TX0-TX31 (Dante) –> Channel 33-64 (iDR32)

    With the recording there is no problem so far, but just had 5 mics simultaniously, the first real test will be during the next two weekends with 24 mics connected.

    With playback from the PC there is a strange thing. When I set the output to TX0-TX1, than I only get signal on the right channel (TX1).
    When I connected my audio application to TX2-TX3, no problem at all. Audio flows to both.

    I tested this a few times with enabel/disabel in Dante controller, using different audio programs.
    I think there is some configuration fault from my side.

    Hopefully you receive your cards soon, to review and approve this behaviour.

    Beside this I just can say DANTE rocks.

    idr32
    Editor only (3 times)
    Korg nano
    Dante

    2011/05/17 at 9:56 am #28264
    Profile photo of BiggsoundsBiggsounds
    Participant

    Jealous! I understand there are 10 cards coming to Australia in the initial batch, with 11 spoken for – I guess it’s russian roulette on who misses that first lot! I’m sure there will be a lot of talk around configuration once they all land, but have you reviewed the Audinate session that was run not long ago? It was very thorough, maybe your issue was covered there (the stuff of the internal configuration seemed pretty thorough, if a little overwhelming without having the thing in front of you to play with immediately!).

    iDR32 mixrack
    MixRack for iPad & Tweak for iPhone apps
    Asus N61 Laptop (x2 wireless)
    Sennheiser IEM (for PFL)
    Dante card (soon!)

    2011/05/17 at 11:11 am #28266
    Profile photo of Anonymous
    Inactive

    I reviewed the presetation a second time, but there was nothing what I think causes this problem.
    But today I have more time for testing and probably I will find the knot;)

    Keep the fingers pressed, that you get your card soon.

    idr32
    Editor only (3 times)
    Korg nano
    Dante

    2011/05/17 at 3:43 pm #28269
    Profile photo of mumumumu
    Participant

    jelaous number 2[B)]

    cheers
    dave

    allen&heath iLive-144 /idr 64 / idr 48 (i am convinced audionate is not delivering coz i am a frank zappa fan)

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • The forum ‘Archived iLive Discussions’ is closed to new topics and replies.