IDR48 Mix rack output level.

Forums › Forums › iLive Forums › Archived iLive Discussions › IDR48 Mix rack output level.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • 2011/05/09 at 1:23 pm #22768
    Profile photo of Kevin-KinchinKevin-Kinchin
    Participant

    Hello forum, I wondered if anyone using an old analogue system noticed any differece in output levels when changing over to i-live.

    I was using an ML5000 until we decided to go digital and noticed a considerable drop in system level when using i-live running at 0db out level compared to ML5000 at 0db (outboard devices were removed from analogue set up to do the comparison test).

    To bring audio level back to near normal in speaker system i have had to add +6db of gain to inputs levels of XTA speaker processing.The XTA’s were driven straight from desk originally, now obviously from mix-rack.

    Any comments welcome.

    2011/05/11 at 10:42 pm #28209
    Profile photo of SteffenRSteffenR
    Participant

    gain structure

    0db istn’t 0db on all systems…

    SRV-AVB
    R-72, iDR-16, xDR-16

    2011/05/12 at 12:14 pm #28212
    Profile photo of AlbinAlbin
    Participant

    Yes, noticed it too – this is normal as far as i experienced…
    You have to push the fader about 5db higher to get the same output as on other desks.
    But i can tell you – you get used to it.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • The forum ‘Archived iLive Discussions’ is closed to new topics and replies.