IDR 48 and power phantom

Forums › Forums › iLive Forums › Archived iLive Discussions › IDR 48 and power phantom

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • 2011/05/09 at 1:08 pm #22767
    Profile photo of Anonymous
    Inactive

    Hi :)
    I have Ilive T112 surface and IDR 48. I have on friday very big concert where i plug into this IDR 40 condenser microphones. I must turn on 40 “phantoms”. Is anyone try do this which this rack? There will be no problem whis PSU?

    Best regards
    Mario from Poland

    2011/05/09 at 2:49 pm #28189
    Profile photo of Anonymous
    Inactive

    Hi Mario,
    I think you should not have any problem, even if you turn on all 48 PPs.
    Once I used on our iDR32 all 32 PPs, and had no issue.

    Further more I think the engineers @A&H have dimensioned the PSU to provide the power.

    I think the DIN61938 is the paper you should scan trough, were you can find the maximum power consumption of phantom power which should be at 10mA imax.

    So if you take the max of 48 mics with imax you have a total power consumption of 0,48A @ 48V this is around ~23W–> this should not be an issue for the PSU.

    Correct me if I am wrong ;)

    HTH Klemens

    idr32
    Editor only (3 times)
    Korg nano
    Dante soon

    2011/05/09 at 3:25 pm #28190
    Profile photo of Mr-BMr-B
    Participant

    Hi Mario I regularly use all 64 inputs on an iDR10 with Phantom on all 64 for orchestral mix no problems generally condensor microphones draw very little current.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • The forum ‘Archived iLive Discussions’ is closed to new topics and replies.