Topic: Recal Save issue | Allen & Heath Digital Community

Recal Save issue

This topic contains 5 replies, has 6 voices, and was last updated by eric5839 12 years, 1 month ago.

Viewing 6 posts - 1 through 6 (of 6 total)

Author

Posts
2011/05/01 at 6:55 pm #22754

ThomasB
Participant

I´m working for the first time with recall safes and have the following thing with it.

I create a recall safe setup as I like it.
Then I make a strip recall safe with the button on the surface. I put the strip out the recall safe with the button of the surface and go back to the “recall safe edit window”. Now my setup for this channel is gone. Everything is “off”

This is a bad behavior

V1.81

ThomasB

IDR 48 T80

2012/02/27 at 1:25 am #29702

frozenwaffles
Participant

did anyone follow this up??? A&H?

Current stock:
2x T112, 2x R72, 2x iDR-48, 2x iDR-16, 2x xDR-16
4x Dante Cards, 3x ACE Cards

2012/02/27 at 10:46 am #29774

Albin
Participant

How about updating to the latest Firmware Version first and then try if this issue still exist and THEN post it.

Cant understand why so many people still not updating to 1.83 – takes about 5 minutst time. [?]

2012/02/27 at 12:07 pm #29775

Rexeltw
Participant

To be fair 1.81 was current in May 2011…

.

Just remember kids no matter how good your mixing is you can’t polish a turd…

2012/02/27 at 12:14 pm #29776

Stealth
Moderator

Hi Thomas

This is how the scene safe system was designed to work. The scene SAFE button on the surface makes all parameters SAFE On or Off for that channel. The scene SAFE icon on the LCD display will only be illuminated if all parameters on that channel are SAFE.

Regards
Sam A&H

2012/02/29 at 3:11 am #29786

eric5839
Participant

1.let scene SAFE button all OFF.
2.Recall the scene againe.
Author

Posts