Topic: iLive Firmware v1.80 | Allen & Heath Digital Community

iLive Firmware v1.80

This topic has 26 replies, 16 voices, and was last updated 13 years, 10 months ago by Anonymous.

Viewing 12 posts - 16 through 27 (of 27 total)

← 1 2

Author

Posts
2011/02/01 at 1:01 am #27171

semmytakaliuang
Participant

the link for download didn’t work:

HTTP Error 404.0 – Not Found
The resource you are looking for has been removed, had its name changed, or is temporarily unavailable.

2011/02/01 at 3:36 am #27172

Anonymous
Inactive

Speaker processor will do all the way to a 5 way system, not just a two way.
iPad app is just darn sexy. Saw it at NAMM too.

Gil Parente
Design & Integration
Entertainment Arts, Inc.

2011/02/01 at 4:10 am #27174

Stix
Participant

The A&H website has changed –

Its here now: https://www.allen-heath.com/ilive/firmware

Cheers

Richard Howey
Audio Dynamite Ltd
IDR48/IDR16/T112/R72

2011/02/01 at 4:44 am #27175

Stix
Participant

quote:

Originally posted by gilparente

Speaker processor will do all the way to a 5 way system, not just a two way.

How? As I see it you can send up to 5 outputs + up to 2 sub feeds but the 5 outputs are just HP filtered only aren’t they? I don’t see how to frequency band limit them further to do mids/highs etc – other than using another FX Matrix unit to split further. This is because the only Low Pass Filters I can find are in the Sub path which has > two outputs. As I see it each unit is a two channel (or 2 + 1) input/two way split with the high pass outputs going to a matrix that feeds up to 5 outputs. So to do a stereo three way you will need two instances of the Fx Matrix – one to split out to subs, and another to do stereo mids/highs. And you still don’t have individual comps/limiters on each output so not all that good as a speaker processor replacement. PLEASE – correct me if I’m all wrong on this!!

Like this:
[img]https://www.flickr.com/photos/audiodyn/5409535443/[/img]
Cheers
Richard Howey
Audio Dynamite Ltd
IDR48/IDR16/T112/R72

2011/02/01 at 12:48 pm #27180

ST-Specialty-Sounds
Participant

Hallo, just installed the V1.8 update on my IDR-48 with my Mac Book Pro 10.5.8, I do not have a surface… now my 48V says hold and I can not use my Phantom Power, Please Help, I have shows coming up this saturday allready, when I am home tonight I will look some more maybe I just don’t see a switch or new function.
Thank You.

2011/02/01 at 12:58 pm #27181

ST-Specialty-Sounds
Participant

Hallo, found it!!! Hold means that you have to hold the Button for a longer time, now just have to finde it where to turn the holdfunction on and off.

2011/02/02 at 10:01 am #27188

Anonymous
Inactive

I have no speaker matrix available at all.

Quite annoying, as I was planning to actually use it!

1.81?

http://www.pianojam.nl

2011/02/02 at 12:20 pm #27189

Lieven-Dewispelaere
Participant

quote:

Originally posted by ST-Specialty-Sounds

Hallo, found it!!! Hold means that you have to hold the Button for a longer time, now just have to finde it where to turn the holdfunction on and off.

Hi,
the hold function is there to prevent accidental engaging the 48v.
It’s there for a reason and i don’t think it is possible to dissable it.
Same function on the surface.
to use it just keep pressing on the button ( surface or editor ) for a second.

regards

Lieven

T112/IDR48/R72/IDR16
Save a tree, eat a beaver

2011/02/08 at 2:36 pm #27317

SteffenR
Participant

Played a bit with the speaker matrix…

If you have a PA System containing nearfills, outfills and center cluster you can use the speaker matrix to transform your mix into your PA syystem needs without change your setup all the time.
So adaption on different lokations is easier.

SRV-AVB
R-72, iDR-16, xDR-16

2011/02/13 at 12:46 am #27379

Pitk
Participant

Paralel compression kicks some serious arse!

Just multiband comp + dynamic eq and the system is winner []

Pitk.

Jukka “Pitkä” Kurkela
Äänimaisema Oy, Finland
iLiveT80 / iDr32

2011/02/13 at 11:06 am #27380

joefi
Participant

quote:

Originally posted by guyharris

I have no speaker matrix available at all.

Quite annoying, as I was planning to actually use it!

1.81?

http://www.pianojam.nl

Hi have a solution for you –

if you have a pc, install the 1.80 editor,
once installed go to f.ex. c:programmsAllen & HeathiLive Editor V1.80librariesfactory

copy the libraries.xml to a usb stick

now move to your mac

go to your app folder , rightclick on ilive editor 1.80

show content

folder contentsrecourcesJavalibrariesfactory

rename the libraries.xml to f.ex. libraries1.xml

move the libraries.xml from your usb stick here and your done.

next time you start editor 1.80 the fx rack shows speaker matrix

regards …… joe

2011/02/13 at 11:15 am #27381

Anonymous
Inactive

Thanks Joe!

http://www.pianojam.nl
Author

Posts