AUX pre/post EQ

Forums › Forums › iLive Forums › Archived iLive Discussions › AUX pre/post EQ

Viewing 8 posts - 1 through 8 (of 8 total)
  • Author
    Posts
  • 2011/01/11 at 3:40 pm #22587
    Profile photo of ddff_lvddff_lv
    Participant

    In most analog consoles there is option to switch pre fade auxes pre or post channel EQ. This is done for each channel separately.
    Any chance to do same thing on iLive?

    ddff

    2011/01/11 at 4:28 pm #27024
    Profile photo of ThomasLThomasL
    Participant

    You can choose the position of the aux, Post-PreAmp, Post-Gate, Post-EQ, Post-Comp and so on…. You can do this seperately for every aux.

    Using & For Rent
    iLive T112 / iDR48
    https://www.lange-ohlemeyer.de
    https://www.lange-ohlemeyer.de/blog

    2011/01/11 at 4:40 pm #27025
    Profile photo of RaySRayS
    Participant

    quote:

    Originally posted by ThomasL

    You can choose the position of the aux, Post-PreAmp, Post-Gate, Post-EQ, Post-Comp and so on…. You can do this seperately for every aux.

    although, it can’t be done for each channel…..it’s global for each aux only. I guess it would need something like the “global direct out” selection on every strip…..

    RayS

    R-72/iDR32/iPS10

    2011/01/12 at 7:40 am #27028
    Profile photo of ThomasLThomasL
    Participant

    That’s what I meant :-)

    Using & For Rent
    iLive T112 / iDR48
    https://www.lange-ohlemeyer.de
    https://www.lange-ohlemeyer.de/blog

    2011/01/12 at 4:23 pm #27034
    Profile photo of ddff_lvddff_lv
    Participant

    Yes, this would be helpful in some situations. Basically, when mixig monitors from FOH.
    Hope they put that option in some of next firmwares.

    ddff

    2012/09/10 at 2:53 am #31298
    Profile photo of clarocqueclarocque
    Participant

    I know this is an old thread… but curious…

    My understanding is that the Global settings are for the input direct outs.

    Is there a way to set the Aux outputs to be pre-eq?

    T112, iDR48, M-DANTE, PL10, MixPad, Editor
    MacBook Pro, Mac Mini
    Lion/Logic Pro
    All latest versions/firmware

    2012/09/10 at 2:41 pm #31335
    Profile photo of joefijoefi
    Participant

    hi clarocque,

    Is there a way to set the Aux outputs to be pre-eq?

    yes – switch the routing button
    then SEl Button from the AUX
    now set the setting in the popup menu on the right where it says
    AUX send

    regards joe

    iDR32 + IPad1 + Laptop
    *** less is more ***

    2012/09/10 at 3:20 pm #31336
    Profile photo of clarocqueclarocque
    Participant

    Thank you….

    T112, iDR48, M-DANTE, PL10, MixPad, Editor
    MacBook Pro, Mac Mini
    Lion/Logic Pro
    All latest versions/firmware

  • Author
    Posts
Viewing 8 posts - 1 through 8 (of 8 total)
  • The forum ‘Archived iLive Discussions’ is closed to new topics and replies.