Topic: Connections T112 | Allen & Heath Digital Community

Connections T112

This topic has 7 replies, 6 voices, and was last updated 14 years ago by rreuscher.

Viewing 8 posts - 1 through 8 (of 8 total)

Author

Posts
2010/12/03 at 6:30 pm #22559

Anonymous
Inactive

The in- and outputs from the desk are not working anymore.
I think that this is since the 1.71 update!

Is in the menu a new button to select the in- and outputs?

thx[!]

Alfred

Profi-Power

Veghel
The Netherlands

2010/12/04 at 2:57 pm #26864

martijn
Participant

Hi Alfred,

Did you connect the Ethernet connection on T and IDR to the ACE connection?

2010/12/04 at 9:16 pm #26865

Jan-Boehm
Participant

Do you mean the in/ and outputs on the rear of the surface?

Greets

Jan

http://www.renitenztheater.de

2010/12/05 at 5:58 pm #26866

Anonymous
Inactive

No i did connect the ethernet connection!

Yes the in- and outputs of the surface.

Greets
Alfred

Alfred

Profi-Power

Veghel
The Netherlands

2010/12/05 at 6:44 pm #26868

Lieven-Dewispelaere
Participant

Alfred,

Can you assign the surface connections to a channel? Select a stereo input , then on the screen got to preamp, there you should be able to select, ‘surface’ from the drop down box an select an input A 5/6 cinch or A 7/8 spdif

Lieven

T112/IDR48/R72/IDR16
Save a tree, eat a beaver

2010/12/06 at 8:37 am #26870

Anonymous
Inactive

Hi Lieven,

Yes i can assign the connection to a channel, that will be work.
Only no sound !!

regards,

Alfred

Profi-Power

Veghel
The Netherlands

2010/12/06 at 9:55 am #26872

Stealth
Moderator

Hi Alfred

Can you please confirm that you have no audio at your surface at all?

Does audio work ok at the mixrack?

Does PAFL or talkback work from the surface?

on the surface Utility – diagnostics page in the power status are all of the green lights active?

quote:

No i did connect the ethernet connection!

Can you please confirm that you connected the cables between the mixrack ans sruface ACE ports?

is the system lock LED active on the back of the surface?

please contact A&H technical support with all the information you know. Thet will be able to help you resolve you issue.

https://allen-heath.helpserve.com/

Regards
Sam A&H

2010/12/06 at 10:01 am #26873

rreuscher
Participant

Hi Alfred,

you said: No i did connect the ethernet connection!

I just updated to 1.71 and can’t find a problem. Did you connect your ethernet cable to the ACE connectors or to the ethernet connection. There is no audio transmitted via the ethernet connections, only via the ACE connection.

Best regards, Rene

Brunssum

Nothing is completly true, and even that’s not true.
Author

Posts