PL-10 on DualRack

Forums Forums iLive Forums Archived iLive Discussions PL-10 on DualRack

This topic contains 2 replies, has 2 voices, and was last updated by Profile photo of yooousuke yooousuke 10 years, 6 months ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #22525
    Profile photo of yooousuke
    yooousuke
    Participant

    Now that PL-10(remote control) has be set an each functions on DualRack system
    the switch function is be wrong.

    Dual Rack System: Surface:R72^iDR16(Master)-iDR16(Slave)
    PL-10 to be connected on “Slave Mixrack”
    The switch to be set as Input mute functions(65ch-70ch)

    As the switch that to be set as Input mute 65ch is be pushed
    LED for 65ch and 66 ch is be lighted at the same time.
    As also push the switch for 66ch, light LED for 66ch and 65ch.

    It seems each channels from 65ch-70ch(65/66 67/68 69/70) might be link.

    It is working as followes below
    From 71ch-128ch on slave mixrack and 1ch-60ch(except stereo channel) on Master mixrack.

    Your advice for PL-10 setting on dual rack would be appriciate.
    Yosuke Asahina

    #26708
    Profile photo of Stealth
    Stealth
    Moderator

    Hi Yosuke

    are the channels you are using in a Stereo configuration? Or are these channels ganged together with the mute function linked? Or ist it possible you have mapped the same function to 2 PL-10 buttons?

    If not

    Please contact A&H Technical Support who will be able to help resolve your issue.

    Please include a show file and information on exactly how you have your system connected and setup.

    Regards
    Sam A&H

    #26711
    Profile photo of yooousuke
    yooousuke
    Participant

    Thank you for your reply.
    Our system on iLive DualRack is used without that setting you point out.

    I appreciate your cooparation every time.
    We will contact A&HSupport.

Viewing 3 posts - 1 through 3 (of 3 total)

The forum ‘Archived iLive Discussions’ is closed to new topics and replies.