DualRack setting

Forums › Forums › iLive Forums › Archived iLive Discussions › DualRack setting

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • 2010/11/01 at 8:20 am #22519
    Profile photo of yooousukeyooousuke
    Participant

    The system:R72/iDR32(Master)/iDR16(slave)

    How could the input signal for iDR32(Master) route to iDR16(Slave) output?

    I couldnot find out this way with as follows below.

    Q[Can I use the outputs on the MixRack?]
    https://www.ilive-digital.com/Downloads/Understanding%20Dual%20Rack%20Mode%20in%20iLive.pdf

    Please tell me the detailed way.
    Your advise would be appriciate.

    2010/11/01 at 5:56 pm #26688
    Profile photo of Anonymous
    Inactive

    On the Output menu on the console, you should have a drop down menu when the MixRack tab is selected.
    You patch the outputs like you normally would. Just remember, you don’t increase your number of busses because of Dual Rack mode. You still have the same master busses, but now you can patch them out of the Slave rack as well.

    edited for accuracy.

    take care
    Gil

    Gil Parente
    Design & Integration
    Entertainment Arts, Inc.

    2010/11/04 at 2:11 am #26702
    Profile photo of yooousukeyooousuke
    Participant

    Thank you for your advice.
    Everything is working.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • The forum ‘Archived iLive Discussions’ is closed to new topics and replies.