Topic: IDR64 & V1.7 | Allen & Heath Digital Community

IDR64 & V1.7

This topic has 7 replies, 8 voices, and was last updated 14 years, 6 months ago by eyals.

Viewing 8 posts - 1 through 8 (of 8 total)

Author

Posts
2010/05/17 at 1:29 pm #22345

Stix
Participant

I see an IDR64 mixrack is due soon – and version 1.7 will be released with it adding some great new features. Check out article here:
https://www.prosoundweb.com/article/allen_38_heath_introduces_larger_ilive_mix_rack/
Bring it on!

Richard
IDR48/T112

2010/05/17 at 3:53 pm #25598

ryanlantzy
Participant

The pre-amp safes is a welcome feature… Just this weekend I did a two band show and after having stored the settings for the first band’s sound check, I had to add a few mic’s to my input list for the master of ceremonies after the second sound check. After intermission, I recalled the scene for the soundcheck for the first band, and marked the new channels safe. However, the preamp settings were overwritten and when they began to talk the level was lower than expected.

2010/05/17 at 5:51 pm #25601

kentlowt
Participant

The only question now is when.
Some very useful new features.

112T/IDR48

2010/05/17 at 6:29 pm #25602

Lieven-Dewispelaere
Participant

They will show the IDR64 at INFOCOMM starting at june 5 so normally version 1.7 should then be available.

Lieven

T112/IDR48
Save a tree, eat a beaver

2010/05/18 at 4:19 am #25608

frozenwaffles
Participant

woohoo excited!

2010/05/18 at 6:11 am #25609

Anonymous
Inactive

Hey guys, wanna offer a trade-up program??

David Schmoldt

2010/05/18 at 8:26 am #25610

antonyja
Participant

V1.7 is planned to be released in July.

Antony Jackson
Software Manager
Allen & Heath Limited

2010/05/18 at 8:29 pm #25617

eyals
Participant

Great news about the side chain source!
2 small questions…
is there an option to side chain a channel from a group?
and can i use the compressor or gate as a ducker?

i have a broadcast application and i need one channel to mute or gated when there is signal in another group…

thanks and keep on the amazing work you are doing there…
Author

Posts