Digital Trim…?

Forums › Forums › iLive Forums › Archived iLive Discussions › Digital Trim…?

This topic contains 2 replies, has 2 voices, and was last updated by Profile photo of timtrace timtrace 14 years, 4 months ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • 2009/12/21 at 6:40 am #22230
    Profile photo of timtrace
    timtrace
    Participant

    Happy Holidays to all —

    Under which circumstances might I rely on the digital trim control?

    I understand that this is a pretty basic question, but I’ve never asked anyone about it.

    Thanks —

    Tim ==

    2009/12/21 at 11:12 am #25005
    Profile photo of Mr-B
    Mr-B
    Participant

    if you have two iLive’s connected one for FOH and one for Monitors then you set the analogue gain using one surface then lock them and use the digital trim on both surfaces to adjust gain so as not to interfere with the other surface, or if you have a digital source connected then you will get the digital trim control + and – 24dB not the usual analogue gain control.
    Think that is about it, just works no drama as you would expect from these systems. Hope this helps.

    2009/12/22 at 4:01 am #25010
    Profile photo of timtrace
    timtrace
    Participant

    Thanks, Mr B. I suspected as much. Thanks for clearing the air for me.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)

The forum ‘Archived iLive Discussions’ is closed to new topics and replies.