Faders stiff when ganged

Forums Forums iLive Forums Archived iLive Discussions Faders stiff when ganged

This topic contains 2 replies, has 2 voices, and was last updated by Profile photo of Doug Doug 11 years, 8 months ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #22157
    Profile photo of Doug
    Doug
    Participant

    I use a couple of channels for playback purposes which are ganged together . The problem I find is the faders are stiff when pushed and they tend to fight back when quick adjustments are made. It feels like the motors aren’t happy moving the two together. Any advice on this one? The desk is running 1.53

    http://www.maltingsaudio.co.uk

    #24746
    Profile photo of Stealth
    Stealth
    Moderator

    Hi Doug

    When Faders are ganged together only move 1 fader in the gang as the other faders will follow the fader you are moving automatically.

    The reason the faders are fighting back is because each fader is trying to follow the level of the other faders in the gang so they are the same level.

    If you do not wish to link the faders you can just remove the fader linking attribute in the gang attributes page.

    Best Regards
    Sam A&H

    #24757
    Profile photo of Doug
    Doug
    Participant

    That makes sense thankyou

    http://www.maltingsaudio.co.uk

Viewing 3 posts - 1 through 3 (of 3 total)

The forum ‘Archived iLive Discussions’ is closed to new topics and replies.