1.2 bug? Fx send not visible

Forums Forums Avantis Forums Avantis troubleshooting 1.2 bug? Fx send not visible

This topic contains 1 reply, has 1 voice, and was last updated by Profile photo of Kalle Kalle 2 weeks, 2 days ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #107983
    Profile photo of Kalle
    Kalle
    Participant

    Hey guys! This week I prepared a show on director 1.2, when loaded into the console I could not see my Stfx1 bus.
    I tried:
    restarting console
    Removing in strip assign
    Removing the fx bus in audio config and removing it in strip assign
    Adding the fx bus in audio config and adding it in strip assign.
    Unassigned it in fx rack and loaded empty rack then Adding the fx bus in audio config and adding it in strip assign and loaded an fx in the fx slot.

    The send is not showing up.
    Video:
    https://we.tl/t-JePOI7LE1S

    Loaded a standard template show:
    All good.

    What I could try, but does not fix it:
    Create a softkey to mimic the mix key of this fx send bus.

    Does somebody else have / had this issue also?

    #108244
    Profile photo of Kalle
    Kalle
    Participant

    Update: seems I worked with a template before software version 1.2, then did a firmware and dpack activation. Then this problem started.

    I could only solve this by rebuilding the template from scratch in V1.2.
    Now Running without problems.

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.