Topic: 1.12 Avantis Firmware Maintenance Update | Allen & Heath Digital Community

1.12 Avantis Firmware Maintenance Update

Tagged: firmware, update

This topic has 11 replies, 9 voices, and was last updated 2 years, 9 months ago by CJ.

Viewing 12 posts - 1 through 12 (of 12 total)

Author

Posts
2022/02/10 at 4:34 pm #105925

Jack_AH
Moderator

Hi all,

We’ve just released a maintenance release for Avantis.

You can read all about it here!

https://www.allen-heath.com/media/Avantis-Release-Notes-V1.12.pdf

and download it here

https://www.allen-heath.com/avantis/#firmware

2022/02/10 at 8:56 pm #105930

Brian
Participant

Thanks!

2022/02/10 at 11:42 pm #105932

psarahtonen
Participant

HEADS UP!
After loading V1.12, recalling my backed scenes returned a dozen or more “INVALID” DCAs, Groups and Mixes. Effects sends are gone.

I have a ton of work to do before Sunday now.

Hopefully your mileage varies. Good luck.

2022/02/10 at 11:56 pm #105933

psarahtonen
Participant

Can you please make V1.11 available as a previous version rather than just the V1.03 that is currently up on the A&H downloads site?

2022/02/11 at 8:19 am #105944

Nicola A&H
Keymaster

@psarahtonen
Thanks for letting us know. Have you recalled your Show file after updating the firmware, or only Scenes?
We recommend backing up a Show file and recalling it after each update.

2022/02/11 at 9:43 am #105948

SteffenR
Participant

After loading V1.12, recalling my backed scenes returned a dozen or more “INVALID” DCAs, Groups and Mixes. Effects sends are gone.

Since a firmware update resets the configuration of the desk to a default value you will need to recall a show that holds your configuration.

To revert to 1.11 will not solve your problem. Only a show recall would do.

2022/02/13 at 10:20 pm #105992

Pat
Participant

Thanks for the heads up Jack!

2022/02/21 at 4:54 am #106132

Alex
Participant

They just made 1.13 with fixes

2022/02/22 at 1:43 am #106145

Brian
Participant

Those fixes have nothing to do with the issues you experienced. A show file is the only thing that stores all settings of the console. A scene file leaves out a specific set of functions (like the aux/buss/fx setup, and other “core” settings of the console).

The firmware update screen very specifically warns people to save their SHOW file. The written firmware instructions have the same instructions/warning. Simply saving a scene file and trying to restore the console from that will not work.

2022/03/01 at 11:10 pm #106264

CJ
Participant

Hi all. Concerning firmware for Avantis. I recently joined the tech team at our church, they are using the Avantis and GX4816. I noticed that they had not (ever) updated the desk since new and is currently sitting with v1.00.

Question: Will I have to update the desk in release sequence or can I just install the v1.13 firmware release?

Thanks for any suggestions.

CJ

2022/03/02 at 12:04 pm #106270

Scott
Participant

You can go directly to v1.13, or any other firmware version.

2022/03/02 at 2:18 pm #106272

CJ
Participant

Thanks Scott, I appreciate the reply.
Author

Posts