Forums › Forums › Qu Forums › Qu general discussions › Using USB as insert for external processing (eg. wavesrack) › Reply To: Using USB as insert for external processing (eg. wavesrack)
2013/11/25 at 4:35 pm
#36319
Not really. A channel is sourced from either the XLR/dSNAKE socket or USB. What you are suggesting is an ‘Insert Return from USB’ which is not supported. You can only insert internal FX on a channel.
However you can use plugins over USB B for send-return FX such as reverbs and delays. For example, assign a Mix to USB 19-20 in Setup / Audio / Output Patch, then route the return from your DAW to one of the Stereo channels.