Reply To: Using Stereo Line Inputs in a Pinch

Forums › Forums › Qu Forums › Qu general discussions › Using Stereo Line Inputs in a Pinch › Reply To: Using Stereo Line Inputs in a Pinch

2014/03/12 at 7:44 pm #38221
Profile photo of Anonymous
Inactive

Yes. Absolutely. I tried Y connecting the inputs (at the AR24) and to my 2 cent ears sounds fine to me. However technically they are line level on the rear of the mixer (I think)
I also ran 3x QU16’s (together) and used the ST1 and ST2 as the inputs from the 2 outside desks. But that’s where the problem came in. They are dedicated to left and right so I had to sum the signal going into ST1&2 however I could still use the 2 outboard QU16s as subgroups. Hope this helps. cheers davyd