Reply To: Using QU-16 as crossover between tops and subs

Forums Forums Qu Forums Qu general discussions Using QU-16 as crossover between tops and subs Reply To: Using QU-16 as crossover between tops and subs

#35414
Profile photo of GCumbee
GCumbee
Participant

Don’t use a GEQ as that is not a bandpass filter. I would use a PEQ and set the HF to a roll off filter (not peak/dip) then run the roll off back to the desired freq. Usually 80-110 or so. I do 90. I have not tried that on a GLD and have not gotten my QU yet. So not sure if HF on a PEQ will go back that far. Problem with using a GEQ is that you want ALL that above the cutoff to go away at some db per octave. With a GEQ there are still spike of sideband from the individual freqs.