Reply To: USB PC WIndows Question

[WaihekeSoundie]

Sorry>> I map the LR main output in my DAW to send to hardware CH 23/24 on the QU — should have been 21/22.. opps…

So lets try that again..

>> Turn on QU then DAW and make sure that DAW can see the QU. If DAW can see the QU it should be able to see 22 outputs– 16 ch + the 3 stereo ST1..3.
>> I map the LR main output in my DAW to send to hardware CH 21/22 on the QU. Note the channel USB inputs in the QU seem hard mapped (far as I can see anyway) so 21/22 infact corresponds to ST3 on the QU
>> Go to QU and select ST3. Press Processing button.. select the channel.. select FN and make sure that Global USB source is USB B Streaming and that ST3 source is USB B.
>> Hit play in your DAW you should see you DAW L/R main out signal on ST3

Andy