Reply To: Stereo Group on ME1

[ahjeff]

Hi Sean

If I understand your issue correctly, you can get this to work by routing the keyboard channels ‘input direct out’ to an odd-even pair in the Monitors tab of the outputs page. For example, ‘Keys Left’ to Monitor channel 3, and ‘Keys Right’ to channel 4. You can then set these as a stereo pair by touching either of the monitor output channels (3 or 4), and switching on ‘stereo link’ in the bottom left corner.

Now if you set up a key on the ME-1, it will only allow you to use the first of these two channels; when selected, this will be a stereo channel on the ME-1.

Hope this helps

– Jeff, A&H