Reply To: Separate PEQ for FOH and AUX on channel strips

Forums › Forums › GLD Forums › GLD feature suggestions › Separate PEQ for FOH and AUX on channel strips › Reply To: Separate PEQ for FOH and AUX on channel strips

2014/03/21 at 12:02 am #38431
Profile photo of Pit LenzPit Lenz
Participant

In the input and gain section of each channel (in the processing window, not the I/O window) you can freely choose any inputs available. Let’ say you want to double 12 channels:
you select ch.1, open the input window, choose input 1 as source. Then you select ch.13 and in the input window you can again choose input 1. Proceed like that with the rest of your channels.

This works only if you select the inputs in the processing window.

Pit