Forums › Forums › Qu Forums › Qu troubleshooting › Qu-Drive Multitrack Recording with cuts › Reply To: Qu-Drive Multitrack Recording with cuts
Ok, i did a few steps to avoid further problems:
– Firmware update on the HD Drive
– Firmware update on Qu-16 to V1.2
– Formated the HD Drive via Qu-16
– Tested the HD Drive with the WD System Check Software = no problems detected
Then… another test today with 1hour and 30min of 1kh sine recording! the sine is generated from my macbook via an analyzer software (REW5.0) into the stereo 3 input of the mixer and recorded via multitrack recording to Qu-Drive.
Conclusion: No dropouts during the whole 1.5h of recording! All looks now as it works… i hope so! I will have one or two gigs this month where i will check it!
keep you up to date!