Reply To: FX Routing

[Nicola A&H]

Hi Loren,

Which version have you updated from? We changed the way you route FX outputs in V1.8. Use the Unassign / Fully Unassign buttons to revert an effect to factory default (mix/return, from dedicated FX bus to dedicated FX ‘short’ return). To route the FX to another channel, go to that channel’s preamp screen and select the Rack FX output from the source drop-down list. To route the FX to physical outputs, go to the Outputs screen, select a socket and choose the Rack FX outputs from the source drop-down list.

Also worth checking that you have enough FX buses in your Mixer Pref DSP configuration?

Hope this helps.