Reply To: can phantom be enabled in ar2412 for ch17-22

[Anonymous]

Schematic wise 48V goes to + and – legs through two pull up resistors. This is on each channel individually so 48V is not directly connected at each mic in but through these resistors. connecting two ins would parellel those thus decreasing the values in half. As i stated it should be ok but you would be permitting double the current to be able to be drawn from the mic. The block diagarm for the desk actually shows them if ya need a visual. I’ll wait for someone else to do with a direct Y cable. For now I’ll just make one cable up with caps to test.

G