Reply To: FX3 > Mix 1 on QU-16: What am I doing wrong?

Forums Forums Qu Forums Qu general discussions FX3 > Mix 1 on QU-16: What am I doing wrong? Reply To: FX3 > Mix 1 on QU-16: What am I doing wrong?

#54252
Profile photo of [XAP]Bob
[XAP]Bob
Participant

Then it has to be routing.

Input signal present on dry channel?
That channel routed to mix 1? Post fade?
Fader for input channel fader up (at 0 for test) whilst Mix1 selected.

Then check on the meter screen that mix 1 has signal.
Also check that the FX return has signal.

Then go to the FX return and unassign it from mix 1 (safety) and check that it is assigned to LR.
Then raise the fader whilst the LR mix is selected.

In theory that should be it – how far *is* the signal getting?