Reply To: HPF on the OUTPUTS

Forums › Forums › Qu Forums › Qu feature suggestions › HPF on the OUTPUTS › Reply To: HPF on the OUTPUTS

2016/02/22 at 12:17 am #54111
Profile photo of Dags
Dags
Participant

Hi there Ratchet.

Agreed, it seems strange that the HPF isn’t there as part of the ‘standard’ PEQ module that is also used for the inputs.

But I tend to use the GEQ for the main & mix outputs and fully cut 20Hz, 25Hz & 31.5Hz (or higher depending on the speakers) in order to tighten up the low end and protect amps/speakers from damage.
Granted, the GEQ may only cut 12dB of each frequency, but this might be sufficient to suit your needs?

Coupled with a HPF on all input channels that need it, I haven’t found myself desiring a HPF on the outputs.

Dags