Reply To: QU-16 Gain Staging

Forums Forums Qu Forums Qu general discussions QU-16 Gain Staging Reply To: QU-16 Gain Staging

#53490
Profile photo of [XAP]Bob
[XAP]Bob
Participant

So you have a unit which is outputting a low level, possibly with some hiss in that analog stage?

I’d suggest that the out-level should be set to 0dB (I.e no output attenuation)
Then tweak the out-range up until you get a sane signal level.

If you are at 20dBu and 0dB already then I’d need to look at what the box does 😉

-6dB input is just about tolerable in a live setting, assuming you don’t end up with a much lower signal much of the time