Reply To: USB replay – a bit of a mind melt :-)

[fred_fraggle]

Yes – when play is pressed audio shows on the meters.. and can be heard via ST3 – to the main mix o/p

— but i am wondering why i can not feed via the ‘main’ layer as i would any other source.

This came about because I could hear audio playing but had no faders open – on the main layer that is. So went investigating as I sort of felt this could catch me out when in the heat of battle and wondering where the audio ( possibly intermission audio) was coming from if I had not stopped the USB replay. It turned out the ST3 fader was open on the master layer (i.e. layer 2 (not the custom layer))

Further investigations showed I could ‘select’ USB audio as a source on the main layer via the USB pre amp button…. but could not actually hear any audio. The source on the channel even changed colour and label as per the instructions on page 23… but still no audio