Reply To: Aux Monitor Mix Advice Needed

Forums Forums GLD Forums GLD general discussions Aux Monitor Mix Advice Needed Reply To: Aux Monitor Mix Advice Needed

Profile photo of Chris93

What is the pick off point for your auxes? Select an Aux and go to the “routing” tab under the “processing” button. For your stated purpose you’d want these to be set to “post comp” so what you’re hearing is after all the channel processing. (You’d choose “post delay” because it’s at the end, but this won’t cause a gain change and you might want to use if for something that you wouldn’t want affecting monitors.)

If you had a compressor with make up gain, or an EQ boost, this would explain your issues. Also, any processing you do on subgroups or your Main LR mix will also change FOH without being heard in your mixes.