Forums › Forums › Qu Forums › Qu feature suggestions › Is Automixing planned for the Qu mixers? › Reply To: Is Automixing planned for the Qu mixers?
2015/10/25 at 12:47 pm
#51635
lesouvage
Participant
I tested it too. When none of the mics are used all the mics stay open which can be annoying. You can change this by using the signal generator of the QU-16/24/32 and connect the mix choosen for the signal with a channel that you add to the AMM mics. With a proper volume of the mix and gain of the channel used (so all the other mix turn off) and the fader of the channel on R/L completely down the other mics are turned of by the AMM feature as long as they are not used.