Reply To: Fx to Mix

Forums Forums Qu Forums Qu troubleshooting Fx to Mix Reply To: Fx to Mix

Profile photo of [XAP]Bob

You shouldn’t hear fx on mix 1, but you will hear the Vox1 effects over mix2. If they are wedges on stage then the haas effect may well cause you to hear it from the “other” wedge.

To test simply mute mix2, and listen for the FX.
Then mute mix1 instead and you’ll hear some of Vox1 – the FX for that channel being routed through mix2

You can still have single fader control if you use either FX1&2 or channel -> return, using FX3&4 which leaves 1&2 available for anything else, by using a DCA on the FX returns.