Reply To: New and in trouble No Audio at all

Forums Forums Qu Forums Qu troubleshooting New and in trouble No Audio at all Reply To: New and in trouble No Audio at all

#50513
Profile photo of Dick Rees
Dick Rees
Participant

You really haven’t given much information, so we’re guessing.

I believe you need to have the Roland connected to a keyboard to get it to output sound, but you make no mention of a keyboard…just the module.

Plug in some headphones and turn up the headphone volume pot to about 10 o’clock.

Try plugging a mic into Channel one. raise the input gain on the channel (per the manual) to +30. Solo (PFL) the channel and tap on the mic. Do you hear anything in the headphones?

If so, raise the channel fader to the “0” mark, the Master fader to the same level, release the channel one PFL button and listen to the mains. Hear something?

If so, you should be good to go.