Reply To: Very low muffled recording straight to Audacity

Forums Forums Qu Forums Qu general discussions Very low muffled recording straight to Audacity Reply To: Very low muffled recording straight to Audacity

#50086
Profile photo of gilly
gilly
Participant

CH/ST/Grp source button
Set this to Insert Sends if you do not want the input
channel and group USB sends to be affected by the
mixer processing (EQ, Comp, Gate, Delay). This sends
the raw Preamp and unprocessed Group signals to the
USB stream and is the typical setting for live recording.

The USB Audio factory reset default patching varies
according to Qu model. All ensure that tracks 17-18 =
LR post-fader for Qu-Drive stereo recording. The
patching can be changed here to suit your
requirements.
Note – Set the USB Audio Patching before using Qu-
Drive or USB streaming.

The following sources can be patched:
X Unassigned
CH Mono channel (Insert or Direct Out)
ST Stereo channel (Insert or Direct Out)
FX Ret FX returns 1-4 pre-fader
Grp Group (Insert or post-fader)
Mix Mix 1-10 post-fader
LR pre Main LR mix – pre-fader
LR post Main LR mix – post-fader
L+R pre Main LR mono sum – pre-fader
MTX Matrix post-fader
PAFL Stereo PAFL monitor